3D Printer, Obtained!

I got an Ender 3v2 from a buddy of mine! He says it doesn't work... But if I can fix it I can have it!

First print. I see what he means...

Lets get this thing level. Printing a whole sheet lets me adjust as it prints, and make sure adhesion is good.

Lets replace that nozzle... It's looking a little ground down.

While we're at it, we should replace the stock feeding tube and extruder as well!

A little better leveling sheet layer!

Definitely usable!

Lets try that print again... Not really looking so hot. Or, looking a lot of hot actually, it looks melted!

Adding in a figure with supports, but extreeeeme stringing.

I couldn't even get the supports off without breaking the figure. They were fused!

Some adjustments were made in the splicer and I wanted to see just what was going wrong. So, first benchy!

Made more adjustments to feeding and retraction from the extruder, as well as temp.

Take a Dick Pick, and one of my spare Fucks to give!

Well... THAT went bad.

Viking Mug

This print is my favorite but it took 3 days!!!

Final product, 3 days of printing, but it is really cool! It holds a can like a coozie!